Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  

Ulti-evening 6h of October 2014

Recommended Posts

Hi Everyone,


Soon it is time for the next Ulti-evening.

Because last edition was such a success we want to keep the interactive part as the core of the ulti-evening.

This time it means we will teach you how to do various and efficient maintenance on your Ultimaker in record time. We will have members of our technical support & repair centre with us!

If you want to know all the tips and tricks, ins and outs and the ropes.. be there!


We will also bring some spare parts for those who are in immediate need!


This workshop will be mainly focussed on the Ultimaker 2.

If you have a special request about a part or Ultimaker Original let me know!


Some more practical information about upcoming Ulti-evening:


Date: 6-10-2014

Time: 17.00 - 22.00

Location: ProtoSpace, Utrecht


17.00 - 18.00 Arrival (bring your Ultimaker) and order food if you are hungry.

18.00 - 18.30 Short introduction

18.30 - 19.00 Food

19.00 - 22.00 Repair & Printing time!


Looking forward seeing you there!


Share this post

Link to post
Share on other sites

Titus: Imo it simply is because most people buy their UM2 assembled and have a lot less hands on experience with tinkering on it. I can hardly imagine that UM won't have another eve dedicated to the UMO.

Btw: I am loving this and will be there for sure!

Small question: Paying for the spare parts, will that be a cash only affair?


Share this post

Link to post
Share on other sites

@ Titus, everyone from Ultimaker is equally skilled on the UMO as well, so if you have any questions just ask!

And what blizz said, and also because most have build the UMO, so there is less of a barrier to take it apart if needed. It is just a different experience then the UM2.

About the spare parts, if you want to order some let me know.

For the 'tutorial', we will probably just bring some.


Share this post

Link to post
Share on other sites

I take my UMO with me I have extrusion problems with grey colorfab filament. So having a evening with service and maintenance might fit well. Haven't figured out what it is. Actually I don't think it is the colorfab filament being the guilty one since it is good filament. But after some time printing it just does not want to extrude anymore. When I stop the print I can extrude again.... So I am thinking my hotend temperature is incorrect while printing. Still need to debug that. Did some ABS prints before and they worked well.

So I will be around.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 86 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!