Jump to content
Ultimaker Community of 3D Printing Experts

Ulti-evening 6h of October 2014


Recommended Posts

Posted · Ulti-evening 6h of October 2014

Hi Everyone,

 

Soon it is time for the next Ulti-evening.

Because last edition was such a success we want to keep the interactive part as the core of the ulti-evening.

This time it means we will teach you how to do various and efficient maintenance on your Ultimaker in record time. We will have members of our technical support & repair centre with us!

If you want to know all the tips and tricks, ins and outs and the ropes.. be there!

 

We will also bring some spare parts for those who are in immediate need!

 

This workshop will be mainly focussed on the Ultimaker 2.

If you have a special request about a part or Ultimaker Original let me know!

 

Some more practical information about upcoming Ulti-evening:

 

Date: 6-10-2014

Time: 17.00 - 22.00

Location: ProtoSpace, Utrecht

 

17.00 - 18.00 Arrival (bring your Ultimaker) and order food if you are hungry.

18.00 - 18.30 Short introduction

18.30 - 19.00 Food

19.00 - 22.00 Repair & Printing time!

 

Looking forward seeing you there!

 

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Have the dual extrusion-set about a year now, but also with 5 new shipments from Ultimaker I never got it to work.

    Perhaps there is a possibility to take a look with an expert?

    Han

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Titus: Imo it simply is because most people buy their UM2 assembled and have a lot less hands on experience with tinkering on it. I can hardly imagine that UM won't have another eve dedicated to the UMO.

    Btw: I am loving this and will be there for sure!

    Small question: Paying for the spare parts, will that be a cash only affair?

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    @ Titus, everyone from Ultimaker is equally skilled on the UMO as well, so if you have any questions just ask!

    And what blizz said, and also because most have build the UMO, so there is less of a barrier to take it apart if needed. It is just a different experience then the UM2.

    About the spare parts, if you want to order some let me know.

    For the 'tutorial', we will probably just bring some.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    i'll be there.. taking my UM2.. i think i need spare parts for the teflon stuff and the extruder... perhaps the bowden tube.. still under warranty.. the support desk knows me :)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    I like this and I would love to come, if it was more close to where I live, or if it would be on a Saterday ? Because I normally work until 17:30 ...

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Dinykb: its until 22h and you can always come a bit later, not everyone arrives at 17 (on the contrary, most people are later)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    I'll try to come the 6th, although I don't have an UM2.....

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    I will be there with UM2.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    I take my UMO with me I have extrusion problems with grey colorfab filament. So having a evening with service and maintenance might fit well. Haven't figured out what it is. Actually I don't think it is the colorfab filament being the guilty one since it is good filament. But after some time printing it just does not want to extrude anymore. When I stop the print I can extrude again.... So I am thinking my hotend temperature is incorrect while printing. Still need to debug that. Did some ABS prints before and they worked well.

    So I will be around.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Pssst... don't forget the dogtags :)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    won't have my driving license in time.

    Maybe an other time.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    I'll be there! Excited to meet you all. My Ultimaker will probably stay at home since I'm traveling by train.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    As always: Bring the nametags! Hope I can still find mine :)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Such a great and smart opportunity :-P Hope to get my UM2 back tomorrow from the repair center. I'll try to be there!

    I would like to buy an extra teflon part and some filament.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    @Sander: I was wondering, are there any tools we should preferably bring?

    @jroen: If they don't make it perhaps you can beg them to bring your printer to the meet :p

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Would be cool to have a review of whats done the 6th for all the users who can't go during weekdays or are to far away.

    17itVHm.png

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Now it would be nice to receive the heatbed kit before monday.

    Ari de Kok

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Will probably drop by... if anyone is carrying one of the heavily modded system, I'd sure like to see it, ie. flexible drive, direct drive, etc.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Hi Coen

    Is heated bed modification + E3D hotend + direct drive + 1 power supply enough :mrgreen:

    I have to admit I having problems printing at the moment.... Haven't had time to debug it.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Finally finished a 3D printed version of my avatar, so I'm ready for Monday evening :-)

    3d logo

     

    PS: Sander, I send you a PM with parts I would like.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 6h of October 2014

    Hi Dirkels

    That looks like a big avatar. Quite some colors in it as well. How much time did it take you to print it?

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...