Jump to content
Sign in to follow this  
fabiodl

Printer stops after 1/4 objects declaring print completed

Recommended Posts

Posted · Printer stops after 1/4 objects declaring print completed

I do not know if this is a firmware or software problem, but I guess the first. Using cura 14.07, with the options shown in the screenshots here http://robotics.dei.unipd.it/~fabiodl/share/fourObjectsCura.zip I generated the gcode in the zip file. The printer stopped after building the brim of the second object, saying print finished.

Firmaware is 14.07 as well.

Do you have any idea of the reasons of this bug?

 

Share this post


Link to post
Share on other sites
Posted · Printer stops after 1/4 objects declaring print completed

In the case that you are printing with an SD card, it might be that your SD card is corrupted. If so, have you tried another SD card? And do you use 'safely remove SD card'?

 

Share this post


Link to post
Share on other sites
Posted · Printer stops after 1/4 objects declaring print completed

I am sorry, it was actually not a firmware problem. It was just a material grinding problem that occurred in the middle of the print. When I came back and saw just one out of four objects, I wrongly assumed that the printer stopped after the first one.

Today I started a new print and noticed it was just a grinding problem.

If any of the forum admin feel it is better to delete this thread, please go on.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 64 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!