Jump to content
Ultimaker Community of 3D Printing Experts

Printed my head in colorFabb Bronze Filament


Recommended Posts

Posted · Printed my head in colorFabb Bronze Filament

Looks amazing! What were all of the settings you used? I've got an UM2 and am having real problems with a successful print. I'm also trying to print similar type face scans as yours.

Also, how did you get your scan? It's really high quality?

Dave

  • Link to post
    Share on other sites
    Posted · Printed my head in colorFabb Bronze Filament

    LOL james.... that`s just wrong!

    Great vid Barnacules

     

  • Link to post
    Share on other sites
    Posted · Printed my head in colorFabb Bronze Filament

    I looked on their website and didn't see anything besides 1.75 offered...is that what you used or did the have 2.85/3.0 available previously?

     

  • Link to post
    Share on other sites
    Posted · Printed my head in colorFabb Bronze Filament

    The settings used were 0.16mm layer heights at 50mm/sec at 260C hot end and 60C bed and it printed out this way.

     

  • Link to post
    Share on other sites
    Posted · Printed my head in colorFabb Bronze Filament

    260C for bronzefill, are you sure? I print (and copperfill) at 205C-210C (which is much closer to what ColorFabb recommends)

     

  • Link to post
    Share on other sites
    Posted · Printed my head in colorFabb Bronze Filament

    I wondered the same thing. 260C seem very high considering what is recommended. I'd also worry about the bronzefill conducting so much heat to the teflon.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...