Jump to content
Sign in to follow this  
rewolff

material feed assembly problems.

Recommended Posts

Posted · material feed assembly problems.

In the assembly instructions there are things like: "manual extrusion should work without too much force".

As this is my first ultimaker, I don't know what "too much force" is. But I think that works.

How fast should the machine be able to turn the extrusion wheel? It moves really really slowly and I can't get it to extrude anything realiistic.

Also after extruding, there is a lot of drooping.

I've managed to print the test-cube, with manual pressure on the PLA material. Of course the quality is very bad as I didn't know when the machine didn't want any extrusion...

So, there seems something wrong with my material feed assembly. What could be wrong? How am I supposed to test it? Can I manually test it with the control panel? (Should I be able to see the PLA material move? It now moves so slowly that you can hardly see the wheel move, you can put your finger on it and it seems to do something....)

Is it normal that it takes 5 seconds after I press "stop" in the control panel to come to a halt?

P.S. Oh...

http://wiki.ultimaker.com/Ultimaker_rev ... _the_clamp

the second picture shows TWO delrin parts. I THINK the current version comes as one piece, correct?

Share this post


Link to post
Share on other sites
Posted · material feed assembly problems.

Derlin parts come as one, but you got to make them two, and assembly like instruction says.

Then, I think you may have same problem I did.

My first print here: IMG_1311.JPG

Solution is to set in gcode "M92 E850", that made more PLA usage for printing (I have Marlin FW).

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • January 22nd  | Ultimaker webinar 'Learn how to choose the right composite material'
      We’ll teach you how to choose the right composite material for your application in our new 40-minute webinar. You will learn how to: 
       
      • Make the perfect choice between glass and carbon fiber 
      • Identify more high-value applications that would benefit from composites 
      • 3D print advanced materials with the right settings 
      • Select the best materials for 3D printing end-use parts 
      • Use dual extrusion to take composite 3D printing to the next level 
      • 0 replies
    • Does your company use Ultimaker? Know one that does? Let us know!
      If your company uses Ultimaker in any capacity, we'd love to hear about it! If the story is there, and you're up for it, maybe we can work together to create a story that will be featured on the site. Here are examples of..
      • 18 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!