Jump to content

Super heavyweight community ontmoeting!


SandervG

Recommended Posts

Posted (edited) · Super heavyweight community ontmoeting!

Ha Nederlanders!!

Hebben jullie ooit al eens alle grootheden van het Ultimaker forum willen ontmoeten?

Willen weten wat voor sprankelende persoonlijkheden er schuil gaan achter de avatar's?

Een biertje willen drinken met hen die al talloze hebben geholpen?

Dit is je kans!!

Ultimaker heeft Illuminarti, Gr5, IRobertI, Paul C. en Luis R uitgenodigd in HQ om het R&D team te ontmoeten en ze wat van Nederlands schoonheden te laten zien.

Dit houdt onder andere in dat we op zondag de 26e in Utrecht een high beer gaan doen en dit is een open uitnodiging voor wie daar bij aan wil sluiten om hen, en wat mensen van Ultimaker te ontmoeten.

De exacte locatie is nog onbekend, maar het zal sowieso in Utrecht zijn.

Hopelijk komen er veel mensen langs en wordt het een gezellige middag.

Afhankelijk van de mogelijkheden van de locatie, zal de planning zijn het rond een uur of 3 van start te laten gaan.

Voor wie langs wil komen, stel ik het op prijs als je hieronder dat kan laten weten.

Hopelijk tot dan!! :)

Edited by TheDeugd
  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Lijkt me wel cool :) Ik zal eens aan de wederhelft vragen of ik buiten mag.

    Weet trouwens niet of het wat is/kan, maar als het in Eindhoven zou doorgaan konden we allemaal gaan kijken naar Project EGG ;)

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Zou leuk zijn Ignace!

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Die ontmoeting en rondleiding in het HQ met het R&D team he, is die ook voor ons :D ?

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Die ontmoeting en rondleiding in het HQ met het R&D team he, is die ook voor ons :D ?

     

    Nog een paar kilo Titus :) we zijn nog geen superheavy he? ;)

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Met zonnebril op proberen te infiltreren in de groep, mss merken ze het niet

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Die ontmoeting en rondleiding in het HQ met het R&D team he, is die ook voor ons :D ?

     

    Als je goed je best doet misschien de volgende keer ;)

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Zou graag langs komen maar zit voor werk tot 5 a 6 uur opgesloten in een Ford fabriek in Duitsland :-(

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Er is een tijd en een plaats bekend.

    http://www.cafe-olivier.be/content/locaties/utrecht Wij zullen rond 4u binnen lopen voor een bierproeverij.

    Je kan aansluiten, je kan ook gewoon een normaal biertje komen drinken!

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    Ik vrees dat het me niet lukt. Heb het net te druk met mijn tentamens.

     

  • Link to post
    Share on other sites

    Posted · Super heavyweight community ontmoeting!

    ahh dat is jammer!

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...