Jump to content
Ultimaker Community of 3D Printing Experts

Gaps in the layer


stephang
 Share

Recommended Posts

Posted · Gaps in the layer

Hello,

I printing currently with my new Colorfabb material and I recognized small gaps between each line. I read a lot of belt tension and have retighten the small y-belts (they were so tight as before). Maybe someone has some tips for me.

The image was taken after 5-6 layers printed.

Cura Setting:

- layer heigt 0,1mm

- print speed 50mm/s

- print temperature 210°C

gaps in the layer

 

  • Link to post
    Share on other sites

    Posted · Gaps in the layer

    Is this a new printer, I mean at most 6 month old?

    It appears to be the same behavior like that in the discussion here, and yet no resolution.

    Could you please slice a simple test "cube" (20x20x10 mm) and print it to be sure it exhibits the issue?

    Then post both the G-code and the configuration file (I don't know how this can be obtained in Cura, but should be a way).

    Of course, a picture would complete the... documents of the case.

     

  • Link to post
    Share on other sites

    Posted · Gaps in the layer

    Yes, the printer is 2 month old. But I think I found the main error, because the cube looks mostly good (i think not perfect). What is your opinion? In the first post I had activated the "spiralize" option because the picture show the ground plate of a vase. I thought it would print the bottom layer normal and print only the walls with the spiralize option. But here is my g-code and ini file: cube.zip

    IMG 0880

    IMG 0881

     

  • Link to post
    Share on other sites

    Posted · Gaps in the layer

    Yup cubes look good to me. Some touches of elephants feet but if the filament decides its going to do that, often there is not much you can do about it - I try to drop the temp assuming I am not going at an insane speed.

    Lol I cannot get my brain around what I am looking at looking at your spiralise pic. The threads might be a result of going too fast, not sure, or is that area an overhang. The pitted areas would worry me probably but I cannot work out their print orientation - which applies to all the surfaces!!

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...