Jump to content
Ultimaker Community of 3D Printing Experts

Y-Axis Loose Need Help :)


Recommended Posts

Posted · Y-Axis Loose Need Help :)

Hey Guys!

Ill get straight to the point, My Y-Axis shaft seems to be loose Ill post the pic at bottom. When the motor makes quick movement the shaft which is visible on the outside of the Ultimaker 2 moves back and forward slightly jarring my prints and causing issues I'm wondering the correct way to tighten them. I've have my UM2 for about 4 months so its relatively new and I didn't have this issue until recently! I would really appreciate the help!

thanks guys!

Ron :)

problem.jpg

 

  • Link to post
    Share on other sites
    Posted · Y-Axis Loose Need Help :)

    Hi,

    Take a look at this link (the part about the axis is just above it)

    http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide#randomfill

    Hope this helps ;)

    You can also download the build manual for the UM2 which is always helpfull:

    https://github.com/Ultimaker/Ultimaker2/blob/master/um2%20assembly%20manual%20V1.1%20_english.pdf

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...