Jump to content
Ultimaker Community of 3D Printing Experts

U2 setting motor to 1.5A


Recommended Posts

Posted · U2 setting motor to 1.5A

Note that this might damage your motor, as you are running it outside of specs. Which is also why the menu's don't allow for anything above 1300mA.

Note that in our own tests we did not get any improvements with more motor power.

(Disclaimer, bla bla. If you damage your motors due to messing with this it won't fall under warranty, bla bla, you'll understand)

 

  • Link to post
    Share on other sites
    Posted · U2 setting motor to 1.5A

    My ultimaker 2, doesn't want to print as far as 7 layer... feeder is ok,nozzle is ok, i dont know what to do :) tried all temperatures, all speed and different models

     

    Note that this might damage your motor, as you are running it outside of specs. Which is also why the menu's don't allow for anything above 1300mA.

    Note that in our own tests we did not get any improvements with more motor power.

    (Disclaimer, bla bla. If you damage your motors due to messing with this it won't fall under warranty, bla bla, you'll understand)

     

  • Link to post
    Share on other sites
    Posted · U2 setting motor to 1.5A

    Are you referring to this subject you made?

    http://umforum.ultimaker.com/index.php?/topic/8141-bad-printing-starting-from-3-6-layer

    Maybe it's better to try to find the solution to the initial problem?

    I doubt that increasing the current will change anything in the severe under-extrusion you're experiencing.

    Maybe answer on your previous topic or continue it?

     

  • Link to post
    Share on other sites
    Posted · U2 setting motor to 1.5A

    in this topic i found how to change 1.5A, i will continue my previous topic, i have new photo of print

     

  • Link to post
    Share on other sites
    Posted · U2 setting motor to 1.5A

    thanx for answers

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...