Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Allignment problem

Hey guys

I have a problem that I cannot solve. I will show the problem using a basic shape.

I have a cylinder with a wall thickness of 1,6 mm. In Cura I set the shell thickness to 0,8 mm. This will create 2 inner and 2 outer shells which together should form the 1,6 mm solid walls.

The problem now is that there is a gap between the inner walls (green). And it is a very particular reoccurring gap only at the left bottom and the right top. Therefore I suspect a hardware related problem.

ProblemRoute

In the picture you see a top view drawing of the layers. At the location of the gap, the wall thickness is 1,9 mm and at the location without the gap the wall has the right thickness off 1,6 mm.

I also show the path of the nozzle. The shells on the outside go counter clockwise and the shells on the inside go clockwise.

My suspicion was that the problem is caused by belt tension differences or miss alignment of the axis. I tested both parameters by continuously making small changes, making a new print and see if there was an effect but I could not see significant differences in the gap size when doing so.

Under extrusion also doesn't seem to be the problem because my extrusion works fine.

Does this look familiar to anybody? It would be great if anyone could help me because I am running out of ideas.

 

  • Link to post
    Share on other sites
    Posted · Allignment problem

    Yes, very familiar. It's backlash. Make sure the short belts are TIGHT. The long belts shouldn't be too tight but reasonably tightened. If you really want to get rid of the backlash on your UMO, I recommend switching to direct drive and replacing pulleys and belts with GT2 belts. With those two changes I got the backlash on my UMO down to about 0.05mm.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 5 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...