Jump to content
Sign in to follow this  
concreteturtle

Fan and motors stopped working

Recommended Posts

Posted · Fan and motors stopped working

Hi all,

Just came across a strange problem.

I added some belt tensioners to my x-axis belts, loosening and retightening the pulleys to make sure everything is perpendicular.

Now when I turn on the machine, the electronics cooling fan doesn't run at all, and the x-axis stepper buzzes a couple of times then the whole thing is silent.

My ulticontroller is still working ok through all of this and the blue LED on the thermocouple lights up, but there is no cooling fan so I don't want to risk running it.

Going to test the fan header to see if there is voltage there, and run the fan off a supply to check it.

What else should I check?

Share this post


Link to post
Share on other sites
Posted · Fan and motors stopped working

Ok, after a little testing, the power supply is putting out 19.52V.

The fan header is putting out 11.84V, so it looks like my fan has died.

Anyone have a good source for a replacement?

Share this post


Link to post
Share on other sites
Posted · Fan and motors stopped working

Anyone happen to know what the correct fan header voltage is?

I'm assuming that the electronics fan runs on 12VDC, can anyone confirm this?

Share this post


Link to post
Share on other sites
Posted · Fan and motors stopped working

Yes, the electronics fan runs on 12V. Most likely it's the fan that died.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 96 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!