Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker loses heat.


Recommended Posts

Posted · Ultimaker loses heat.

I have a problem with my printer. It cools down at some random point.

Wich causes the printer to underextrude.

It goes from 220 to 190 and stay arount that.

Ive checked the cables but they look fine.

Anyone know what might cause that?

 

  • Link to post
    Share on other sites
    Posted · Ultimaker loses heat.

    Do you have Ultimaker original? original+? Or UM2?

    Does the display actually change to 190C? If so there is nothing wrong with the hardware and you probably have a plugin lowering the temperature - check for plugins in Cura. Or maybe you are having problems printing over USB cable? USB printing doesn't work great and may require you to try other cables, computers, USB buffers.

    Or do you mean you tested the nozzle and it is at 190C even though the Ultimaker thinks it is at 220C?

     

  • Link to post
    Share on other sites
    Posted · Ultimaker loses heat.

    Ive managed to fix the problem.

     

    Do you have Ultimaker original? original+? Or UM2?

    Does the display actually change to 190C? If so there is nothing wrong with the hardware and you probably have a plugin lowering the temperature - check for plugins in Cura. Or maybe you are having problems printing over USB cable? USB printing doesn't work great and may require you to try other cables, computers, USB buffers.

    Or do you mean you tested the nozzle and it is at 190C even though the Ultimaker thinks it is at 220C?

     

    Ultimaker original with heated bed upgrade.

    Yes, the display changed. There are no wierd plugins, and i print using SD card.

    I used the new version of cura and when i switched to a older one the problem was gone.

    But i did nit find anything that might have caused it in cura itself.

    But the problem is gone now. Thnx anyways :D

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...