Jump to content
Sign in to follow this  
jcosmo

Preparing the hot end with ABS

Recommended Posts

Posted · Preparing the hot end with ABS

I had to email UM support to find out what the short length of ABS that came in the kit was to be used for, and subsequently have noticed a couple of posts regarding initial extrusions with ABS as a mechanism for possibly reducing PLA plugs.

This isn't mentioned anywhere in the assembly instructions, and I've not yet done it because the printer is functioning well and I'm loathe to touch it.

What is the general consensus on doing this, and if its a good idea then shouldn't it at least be recommended in the wiki pages relating to "your first print"?

Share this post


Link to post
Share on other sites
Posted · Preparing the hot end with ABS

It's not against plugs, it's against leakage. The idea is that you fill up any tiny gaps between the heaterblock and the nozzle/PEEK with the ABS. But if your hotend is not leaking anywhere it's not needed.

Share this post


Link to post
Share on other sites
Posted · Preparing the hot end with ABS

I ended up having leaks and putting ABS through ended up fixing it (and stinking up my office for awhile :D ).

It would be really nice if this was documented in the Ultimaker documentation. I had no idea what the ABS was for until I was told here.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 182 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!