Jump to content
Ultimaker Community of 3D Printing Experts

Problem after updating firmware


Recommended Posts

Posted · Problem after updating firmware

Hello, I have noticed that my ultimaker dont retract filament after aborting a print. I had a issue and stopped the print. When i started the print again i noticed that the feeder skipped because (if you remember) the printer is on the first second speeding up the feeder and then when the filament comes to nozzle it reduces the speed on the normal value. Other thing from same problem, the nozzle is always oozing because the filament is in the nozzle and not retracted (i mean alot of oozing).

Sorry for my english, if you dont understand i can record a video. Can i downgrade or something? Thanks in advance


  • Link to post
    Share on other sites

    Posted · Problem after updating firmware

    Yes, and after several restarts its the same. I figured out that when i use new function "pause" and then abort then its everything like before update. And this is because the printer retracts of the pause function. And even after finishing a print it doesn't retract back, the head goes to its 0 position and oozing. sux :(

    sorry cuz i call it retraction, i mean just the "pull back" of the filament, not the retraction like in the printing process.


  • Link to post
    Share on other sites

    Posted · Problem after updating firmware

    I have this exact same problem,

    I re-installed the last versio but still the same problem. Please help i was creating beautiful printd and now everything i make is shit. I also notice that the material is not sticking it just folows the nozzle.

    I tried increasing the temp. This helped a little but i don't want to do this everytime i print . It was working great before so this is a retraction problem?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    • Create New...