Jump to content
UltiMaker Community of 3D Printing Experts

Help! sauver une impression


duriel
 Share

Recommended Posts

Posted · Help! sauver une impression

Bonjour

j'ai vu qu'il était possible de sauver une impression suite a un bouchage de buse.

http://umforum.ultimaker.com/index.php?/topic/2289-petite-astuce-pour-sauver-un-print/

Seulement j'ai un peu de mal a m'y retrouver.

Mon Gcode commence comme ceci.

;FLAVOR:UltiGCode

;TIME:212491

;MATERIAL:133750

;MATERIAL2:0

;Layer count: 1098

;LAYER:0

M107

G0 F9000 X76.933 Y83.202 Z0.300

;TYPE:SKIRT

G1 F1200 X81.510 Y82.343 E0.55883

G1 X84.638 Y82.343 E0.93419

G1 X85.384 Y82.342 E1.02371

G1 X89.204 Y82.343 E1.48211

G1 X90.376 Y82.342 E1.62275

G1 X91.572 Y82.342 E1.76627

G1 X95.473 Y82.343 E2.23439

G1 X105.548 Y82.357 E3.44339

G1 X108.622 Y82.356 E3.81227

G1 X111.465 Y82.356 E4.15343

G1 X121.790 Y82.370 E5.39243...........

Serait il possible de repartir? La piece est toujours collée sur le plateau, j'ai mis en pause pour déboucher la buse.

 

  • Link to post
    Share on other sites

    Posted · Help! sauver une impression

    oui merci Jérome c'est ca. Mais j'avais deja vu le topic.

    En fait je me suis débrouillé il suffit de suprimer les layer deja imprimés dans le gcode.

    Par contre le prob c'est de retrouver le bon layer, d'ou repartir, meme avec cura pas facil!

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • Here it is. The new UltiMaker S7
        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 10 replies
      • UltiMaker Cura 5.3.0-Alpha 🎄 Tree Support Spotlight 🎄
        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 17 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 14 replies
    ×
    ×
    • Create New...