Jump to content
Ultimaker Community of 3D Printing Experts

Site internet 3dsolex

Recommended Posts

Personnellement ma sonde sort nickel depuis que je l'ai changée et remise en place comme il ce doit.

Mais je crois que je vais pas attendre avant d'acheter le kit. Je suis pressé de voir le résultat sur de petite pièce imprimée avec la buse de 0,2.

Share this post

Link to post
Share on other sites

reçu ce mail aujourd'hui, ça avance, ça avance... doucement mais ça avance


THANK YOU for buying from www.3dSolex.com!

Your order is underway.

The shipment contains Nozzles from E3D, like advertised.

These have little holes on the side to identify them.

Some have of you have received a 3dSolex “JET”. These are only

identifyable by LOOKING at the hole size, sorry!

The JETs are extremely slippery inside, you can test with the little screwdriver

and compare with the E3Ds. Ours have a special treatment.

Some packages have no 7mm pipes in them, because I have vacuumed all of Oslo and it is completely empty.


Those who did not get 7mm pipe, will get it later.

ALL of you will get a free 0.40mm JET when they arrive, in addition to what you already have.

We are first movers, so sorry for the little inconveniences!

I am currently taking orders for Teflon couplers, please check the web site.

Good for me if I can add the pipe / Free JET to such an order.

Our Teflon pieces are of Dupont material, very slippery inside, and cost 20E for 2 pcs.

They ship without VAT to Europe in a small envelope.

Ultimaker now have the “glass filled ones”, which are not as slippery but MAY last longer, at ca 19E inc VAT each. Mine are better, but are here end of March,



Share this post

Link to post
Share on other sites


So sorry guys, but there are so many things that can go wrong, and a few did!

But the collective shipment is underway now!

I was at a conference in Sweden, and one woman came to me and said that she

decided to buy the UM2 only after it had exchangeable nozzles.

I think it was a great complement!

I think (same as others do) that even 4.000€ does not buy an overall better printer.

It is just fantastic! Only .. there are 3 or 4 know-hows, and the sense of accomplishment

when it first worked for me!

There are now people in many countries waiting for the stuff which is underway:

Belgium (thank you Didier!); France, CH, Spain, Israel, New Zealand, Australia, Germany, Croatia,

Sweden, Finland, Uk, Ireland, Netherlands, Italy (thanks Andrea!)


here some stuff printed with 0.25-040mm

M Test post 5 Min process

Printed with different nozzle sizes

Dragon 030mm UM2 C


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 117 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!