Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · No Extrusion at all

Hi guys. Iam having a problem with my ultimaker original, no material is coming out of either of the extruders at all.

 

  • Both the extruder wheels are turning and I have seen bite marks on the PLA.
  • Both the extruders are getting up to temp
  • The bed is level
  • Both extruders are level

 

Does mean that something is assembled wrong in the hot ends? Do you have tips on what to look for?

Update: I did get a bit of plastic out of extruder one but that is all. It wasn't enough to print it and now there is none again

 

  • Link to post
    Share on other sites
    Posted · No Extrusion at all

    is there a nice strand of plastic coming out if you turn the extruder wheel by hand before starting a print?

    if not: than you have a blockage somewhere. You can try to poke in the nozzle with a thin strand of metal wire (from a metal brush). If that doesn't help the problem could be higher up.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...