Jump to content
Sign in to follow this  
trobok

Top Layer weirdness

Recommended Posts

Posted · Top Layer weirdness

Hi Guys, after my firmware upgrade I am getting weird issues with the top layers. Notice the little spacing in areas like by the heart. It does it on both my ultimakers and does it with multiple materials. It used to print perfectly like the one in the image, now I cannot seem to find a fix.

Any suggestions?

 

failboy

 

Share this post


Link to post
Share on other sites
Posted · Top Layer weirdness

Hmm. It seems to me that the top layer is missing, and I'm seeing the shell and infill. Have you checks the bottom/top layer thickness?

 

Share this post


Link to post
Share on other sites
Posted · Top Layer weirdness

You clearly sliced these 2 objects differently because I can see the diagonal infill is along a different angle. Do you still have the original gcode for the "good" one?

Cura saves all settings in the gcode file on the last line of the file (encoded). You can reload an old slicing profile in cura by going to "file" "load profile from gcode". I would try that and reslice.

I'm thinking maybe your infill is further apart or maybe because of the rotation of the part on the bed the infill lines aren't supporting the top layer as well. Or maybe you have thinner layers (say .05mm instead of .1mm) and the "threads" of filament are breaking.

 

Share this post


Link to post
Share on other sites
Posted · Top Layer weirdness

Yeah This one was sliced differently, but I had tried the same gcode as previous with same outcome. WIll keep checking it out, thanks!

 

Share this post


Link to post
Share on other sites
Posted · Top Layer weirdness

I have a similar problem - prints seem to be missing the top layer.

I've only been using Ultimaker for about 24 hours, so I never knew the old firmware.

Here is a design I tried to print (rendered in Sketchup):

http://umforum.ultimaker.com/index.php?/gallery/image/13840-mousepoke-interfaceboardmount/

And here is a photo of the printout:

http://umforum.ultimaker.com/index.php?/gallery/image/13839-dsc01946/

Note the seam between the shell and the infill, which in some places shows as a crack...

My settings:

Printer: Ultimaker 2

Material: White Ultimaker PLA

Extruder temp: 215C (I had uneven extrusion issues at 210 requiring many atomic method clearings... 215 seems better)

Layer height: 0.06mm

Shell thickness: 1.2mm

Bottom/top thickness: 0.8mm

Fill density: 15%

Speed: 50mm/s

Support type: None

Platform adhesion type: Brim

All the advanced settings in Cura are at their defaults.

Any advice would be helpful.

Thanks!

Josh

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!