Jump to content
Ultimaker Community of 3D Printing Experts

Calibration procedure with Cura e.g


Recommended Posts

Posted · Calibration procedure with Cura e.g

Hello together,

I am searching about an hour for a clear answer to my question, but I think everyone has

a different method. But I am new and I want to do it pretty right :) .

The theme is the calibration of my Utimaker with e.g. the Cura procedure. What I don´t understand

is, must I do the extrusion of e.g. 100mm filament through the hot end, or should the filament

walk free in the bowden tube. I think (and read it) theres a difference between the both methods.

And then, when I got the right lenght, what must I do, to get the right E-steps number. Is there a formula?

Sorry for my newbie stupidness.

Thanks Chris.

  • Link to post
    Share on other sites
    Posted · Calibration procedure with Cura e.g

    First of all, the Cura first run wizard could guide you a bit better. With some photos, and better guidance. Sorry about that.

    It assumes you do a cold extrusion, but I haven't found a difference between cold and hot extrusion. But some people say there is. (putting 100mm of filament trough the hotend would create quite a mess, and wouldn't work at the speed it is using for the calibration)

    On how to do it, I did it like this:

    http://daid.eu/~daid/IMG_20120302 ... small.jpeg

    http://daid.eu/~daid/IMG_20120302 ... small.jpeg

    If you enter the extruded length into Cura, then it will update the "steps per E" for you. No need to use formulas. (which would be silly, why let the user calculate something if you have a big calculating machine in front of you)

  • Link to post
    Share on other sites
    • 3 weeks later...
    Posted · Calibration procedure with Cura e.g

    running Cura 12.08, I calibrated the feed distance as 108mm, which gave e steps/mm as 809.2

    I set this number in Cura and generated the 'fine' option.

    I checked the Gcode file and it still had as the first actionable line: M92 865.888

    so I edited it to M92 E809.2 and started the printer

    both windows listed input parameters

    the line: Echo external reset

    was followed with Echo steps oer unit

    Echo M92 X Y Z E865.89

    all of this was checked after I trustingly ran the printer, which printed PLA (pure, light air) after 20mm of a 30mm print job.

    So where do I set this parameter and know that it stays set?

    thanks,

    EM

  • Link to post
    Share on other sites
    Posted · Calibration procedure with Cura e.g

    The echo in the terminal window is done before the M92 is set by Cura, so you will see the default value there. The value set in the top of the GCode is controlled by a setting in the preferences of Cura.

  • Link to post
    Share on other sites
    Posted · Calibration procedure with Cura e.g

    Daid,

    Please add this to the documentation that I am sure you and Ultimaker are working on for Cura.

    Thanks, Bill

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • 24 Visiting our virtual showroom

      1. 1. Have you visited our virtual showroom before?


        • Yes
        • No
      2. 2. If yes - what content did you find most interesting?


        • Information about Ultimaker ecosystem
        • Applications & application stories
        • Customer success stories
        • Webinar sessions
        • Material wall & ecosystem partners
        • New product introduction; software subscription plans
      3. 3. What of the below would make you consider visiting (again)?


        • New Live Ultimaker Webinar streams
        • ‘Ask Me Anything’ with industry experts or Ultimaker staff via main stage and public chat
        • New customer success stories
        • New applications
        • Presentations/news from ecosystem partners
        • Opportunity to meet representatives for an interactive tour
        • Helpful videos like Software tutorials
        • Other; leave input in a comment below!

    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...