Jump to content

Tinker Firmware


rigs

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted · Tinker Firmware

Hello,

J'ai eu la même chose... rien de grave mais bon... tu as pris quelle version? Il me semble que ça a disparu avec la derniere version dispo

 

La 16.01 , je crois que c'est la dernière, non ?

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Heuuu ! oui, j'ai oublier de dire que ce nouveau Tinker Firmware est génial.

    Changer les réglages en cours d'impression, juste en tournant la molette, est vraiment une super idée.

    Best N° 1 !

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Popeye, c'est moi qui ai déclaré le bug.

    As-tu touché au paramètres de LED pendant l'impression ?

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Popeye, c'est moi qui ai déclaré le bug.

    As-tu touché au paramètres de LED pendant l'impression ?

     

    Je ne suis pas sûr ?! Il faut que je demande autour de moi. Moi, je n'y est toucher qu'après avoir constater le problème.

    Bon, j'ai la raiponce. Personne n'y a toucher avec cette version 16.01. Une personne a joué avec, mais c'était avant la mise a jour.

    Pourquoi ?

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Je cherche a reproduire le bug....

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Bonsoir à tous.

    Je voulais réinstaller Tinker sur ma ultimaker mais je ne vois pas comment selectionner le .hex dans cura2.1.2 .

    Il n'y a pas de menu comme decrit ci dessus.

    ************ Onglet " Machine " --> Installer un firmware maison ***************

    J'ai l'habitude d'utiliser Simplify3D mais pas cura.

    Pouvez vous m'aiguiller

    Merci

    Ollo

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Ce n'est pas encore dispo dans le cura 2.1, tu peux utiliser une ancienne version pour le faire (genre la 15.04.06)

  • Link to post
    Share on other sites

    Posted (edited) · Tinker Firmware

    Je cherche a reproduire le bug....

     

    Bonjour,

    Le bug de l'écran qui fige, cela m'est arrivé une fois  depuis l'installation de la 16.01

    Je suis toujours sur cette version et rien depuis.

    Cela m'est arrivé après lancement de multiple petite impression coup sur coup sans arrêt de machine.

    Je me suis aperçu que la molette ne répondait plus a la fin du programme, écran figé, Led allumé sans qu'elle ne puissent s'éteindre (mise en veille).

    J'ai coupé le jus, c'est reparti sans plus le refaire.

    Fred.

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Hello,

    La seul fois ou l’écran c'est figé, c'est lors de l'utilisation du plugin Tweak.

    Sinon RAS.

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    ok, merci vous deux !

    J'en conclus que le bug est totalement aléatoire....

    • Like 1
    Link to post
    Share on other sites

    Posted · Tinker Firmware

    C'est un peu ça :D

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Hello,

    Je viens de passer sur la Maj du firmware (16.07) et j'aimerai savoir si qqun à rencontré le même problème que moi concernant la modification des profiles des différents matériaux sur l'UM2 ?

    J'ai bien réussi à ajouter un profile de matériau, mais la ou ça se complique c'est pour l'ajout d'un diamètre de buse différent de celui présent dans la liste de ce profile...

    J'aimerai ajouter un diamètre de buse de 0.15 et pour le moment je n'y arrive pas. Même en essayant de remplacer le diamètre de buse 1.0 que je n'ai pas :/

    Je fais pourtant attention à tout ce qui est espace etc lors de la modification mais rien n'y fait.

    Si qqun à une idée, merci d'avance.

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Je ne crois pas que ce soit pris en charge Tinker reflétant pour la plus grosse part ce qui "faisable" dans le firmware d'origine.

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Ah ok, dommage...

    Car dans mon profile PLA ça aurai été chouette qu'il switch automatiquement sur une température de 180° des lors ou je lance un print pour buse de 0.15.

    D'ailleurs je me demande comment c'est géré le switch de ces températures. Est ce que l'information de la buse est intégré au début du Gcode d'un print ?

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    D'ailleurs je me demande comment c'est géré le switch de ces températures. Est ce que l'information de la buse est intégré au début du Gcode d'un print ?

     

    Oui:

     

    ;FLAVOR:UltiGCode;TIME:1378;MATERIAL:800;MATERIAL2:804;NOZZLE_DIAMETER:0.400000;NOZZLE_DIAMETER2:0.400000

     

    The five usable nozzle sizes are hardcoded at the moment,

    see here.

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Ok TinkerGnome, thank you for this informations.

    But if the nozzles size isn't in the list, how he determine the value to use ? He use the 0.4 nozzle in standard value ?

    Thanks in advance for your reply and your help.

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    But if the nozzles size isn't in the list, how he determine the value to use ? He  use the 0.4 nozzle in standard  value ?

     

    exactement.

    If nothing is defined in the UltiGCode comments (or an "unsupported" value), the firmware always falls back to the temperature value of nozzle index zero (0.4mm).

    This way it is backwards compatible with gcode files from older Cura versions.

    And don't forget that the material profiles on the printer are only used in conjunction with Cura / UltiGCode.

    (...and to be honest: i haven't used Cura / UltiGcode for a while...)

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Ok tinkergnome, thanks for all this details.

    Personnaly i try to use the new Cura 2.1.2, because i never use it. And for the futur i think i must go on it to be familiar with it and all his settings.

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

     

    But if the nozzles size isn't in the list, how he determine the value to use ? He  use the 0.4 nozzle in standard  value ?

     

    ....

    And don't forget that the material profiles on the printer are only used in conjunction with Cura / UltiGCode.

    (...and to be honest: i haven't used Cura / UltiGcode for a while...)

     

    By the way, it is possible to make an artificial maximizing from material setting, the filament diameter 0.40/0.15 = 2.66 * 2.85 = 7,85 mm or minimazing the material flow by the relative factor

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    Hi, I just bought myself a Wifi SD Card and it works really well with TinkerGnome! Thank you a lot.

    Now my Ultimaker 2+ has all I want.

    Awesome software and an Networkdrive.

    Short summary of what I did:

    1. Install latest Tinkergnome 16.08.1+

    2. Bought Toshiba flashair 32gb Version w03 (w03 is really important)

    3. Wrote my own config file:

    CIPATH=/DCIM/100__TSB/FA000001.JPG

    APPMODE=5

    VERSION=FA9CAW3AW3.00.01

    CID=CENSORED

    PRODUCT=FlashAir

    VENDOR=TOSHIBA

    APPSSID=YOUR Wifi SSID

    APPNETWORKKEY=your Wifi Password

    LOCK=1

    WEBDAV=2

    TIMEZONE=8

    DNSMODE=1

    UPLOAD=1

    MASTERCODE=000000000000

    APPAUTOTIME=0

    4. Added

    \\flashair\DavWWWRoot as a Networkdrive in Windows

    • Like 1
    Link to post
    Share on other sites

    Posted · Tinker Firmware

    Nice I have a toshiba 16gb wifisd but It never worked on umo+

    The prt that worries me it's that I think that wifisd can use 1amp to stay on, if you use a 35W heater bed and all 'on' it might be too close to the limit? Just wondering if you tested all 'on'

  • Link to post
    Share on other sites

    Posted · Tinker Firmware

    I am not sure how many Watts my heated bet draws. Highest power draw is probably while printig abs (temps at 260 and 100). Had no SD issues there

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...