Jump to content
Ultimaker Community of 3D Printing Experts

Dual Extrude etc


highlea
 Share

Recommended Posts

Posted · Dual Extrude etc

I have been working with second extruder to produce supports and notice some effects that may have been covered elsewhere, but bring them together here:

1) Extruders keep swapping even though above level of support and nothing to be printed by second head

2) Wipe tower is very fragile if materials do not bond well. Either have to build huge tower or it falls over before end of print

I see cut-out of unnecessary extruder swaps is planned for 'pink unicorn', but could we also have separate wipe towers for the two nozzles.

The Cube appears to use a mechanical wiper and priming bin. Can we have provision for this, or is it all covered by patents? This is the ideal solution and means we don't need a wipe tower.

 

  • Link to post
    Share on other sites

    Posted · Dual Extrude etc

    Finding out if something is covered by patents is hard, because there are tons of them. Most of the patens are (intentionally!) vague, which increases the difficulty even more.

    The cube does use the wiping and a priming bin, but the one that I saw in action did work well, but the material change took about 25-30(!!) seconds.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...