Jump to content
Ultimaker Community of 3D Printing Experts

Extruder getting off course


Recommended Posts

Posted · Extruder getting off course

Hi,

I got my Ultimaker 2 in Janurary, and have been getting good quality prints for the past 4 months.

I am attending a trade show this weekend, and was invited to bring my 3d printer, so in anticipation, I have printed about 10 objects for example.

Suddenly, starting yesterday, I have been having a problem where the extruder is printing just fine, and then suddenly I hear a kind of grind sound, like the belt is slipping, and the whole nozzle and everything moves to the right about 10mm. And it keeps printing like nothing happened. I have attached a photo. I was printing a vase that should be straight up.

I did buy some sewing machine oil and did oil the x and y shafts, but its still bad.

Any help for this newbie before my show on Friday????

 

  • Link to post
    Share on other sites

    Posted · Extruder getting off course

    95% of the time it's a loose set screw on the pulleys. Especially when it's a large sudden move like this. So get a 2mm hex allen wrench and tighten the hell out of the axis that is slipping. It's 70% of the time the one on the motor itself so you may have to remove the cover over the motor which only has 2 screws holding it in. You may have to also separate the motor from the wall which is another 4 screws - position the bed just under the motor so you can rest it on the bed if you need to take a quick break.

    occasoinally it's the other pulley on the short belt. Very rarely it's one of the other 3 or 4 pulleys for that axis.

     

  • Link to post
    Share on other sites

    Posted · Extruder getting off course

    Any help?

    I printed an octopus twice and both prints had issues at the same layer.

    So I tried a shorter model. Printed the whole thing, but I had Cura set to do two models. First model went well, but the second failed in 2-3 layers.

    I have no idea why.

    Ideas?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...