Jump to content

Problèmes impression UMO+


monika18

Recommended Posts

Posted · Problèmes impression UMO+

Bonjour,

J'ai reçu mon imprimante 3D Utlimaker Original + et j'ai terminé de la monter ce weekend.

Après tant d'efforts, j'ai voulu imprimer ma première pièce via le site youmagine.com pour avoir un aperçu de la qualité que cette imprimante donne MAIS malheureusement le résultat est très mauvais et la qualité aussi et je ne comprends pas pour quelle raison malgré mes recherches sur internet.

Quand je lance l'impression d'une pièce via le site, celle-ci ne m'imprime pas du tout ce que je lui demande mais fait vraiment du n'importe quoi. Elle décale à chaque couche de 1 cm et laisse une surface avec des granulés.

J'utilise du PLA gris et je n'ai fait aucunes modifications au niveau des réglages (origine).

Je tiens à préciser que j'ai installé à plusieurs reprises le software (curra 15.01), vérifier le calibrage des barres de l'imprimante, vérifier les différents capteurs et ainsi la tension des courroies.

Je ne sais pas si le problème vient du software ou de la carte mère.

J'ai vraiment besoin de cette imprimante pour un projet d'école, si vous pouvez m'aidez ça serait gentil.

Monika

 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...