Jump to content
Ultimaker Community of 3D Printing Experts

Random Missing part of layers


Hyrumaze

Recommended Posts

Posted · Random Missing part of layers

Hi.

Most of the times when i try to make the Gcode, there is a missing part of layers.

For exemple this one : 1.thumb.png.08a23fd51d8af439636f66ce76529a07.png

2.thumb.png.ec801bdfe115dc5ac6f48eeb161f2376.png

3.thumb.png.ebd6bee7b67c1f244ee1da2654eb82b6.png

As you can see, there is no probleme.

But when i try to do the Gcode, this happend almost every time.

4.thumb.png.b44d0b6e042a94cb15188dafc477e049.png

It's very annoying because i have to do the gcode again and again.

Plus if i try to put 2 or more items, it happend every time.

I use the latest version of cura and it happend on differents computers.

1.thumb.png.08a23fd51d8af439636f66ce76529a07.png

2.thumb.png.ec801bdfe115dc5ac6f48eeb161f2376.png

3.thumb.png.ebd6bee7b67c1f244ee1da2654eb82b6.png

4.thumb.png.b44d0b6e042a94cb15188dafc477e049.png

  • Link to post
    Share on other sites
    Posted · Random Missing part of layers

    It's hard to see what's missing on the images (the new forum software seems to just shrink images down without keeping the original?). You might want to play around with the "Fix horrible" checkboxes in the expert settings and see if that helps.

  • Link to post
    Share on other sites
    Posted · Random Missing part of layers

    I have already played with the settings, nothing changes.

    When i check the layers from the stl, there is no roblems.

    But when i save it to a Gcode and i check it, with the same stl some times it's only the first layer that mising or i got the 10 first layers, then the layers from 11 to 60 went missing and i get back the layers from 61 to the end.

    This morning i tried to do a Gcode, and i passed around 30 minutes to get a good Gcode.

    I have used cura on windws xp,7 and 8 ad every times i had this problem every times.

  • Link to post
    Share on other sites
    Posted · Random Missing part of layers

    So you're only seeing it when you load a Gcode file into cura? In that case it's more likely a bug with the Gcode viewer in cura. Have you tried printing one of the files that you have trouble viewing?

  • Link to post
    Share on other sites
    Posted · Random Missing part of layers

    Thank you, it worked.

    I tried to launch a Gcode with missing layer on Cura, and it didn't worked.

    I opened the same Gcode with Repetier Host, it showed the piece with the missing layers and it worked.

    Have a good day.

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...