Jump to content
Ultimaker Community of 3D Printing Experts

UMO+ ligne horizontale

Recommended Posts

Posted · UMO+ ligne horizontale


Je continue d'apprivoiser mon UMO+....

Les pièces que j'imprime proviennent des banques d'objets en ligne.

Les résultats me conviennent...sauf que, il y a une ligne horizontale sur chaque print à env. 13 mm. du plateau...Comme si la machine "sautait' une ligne, les pièces sont même cassantes à cet endroit !

J'ai pas mal cherché...vérifié mon axe Z, pas de point dur...Là je sèche...

Merci d'avance de vos conseils !!


  • Like 1
Link to post
Share on other sites
Posted · UMO+ ligne horizontale

Salut mons1971,

J'ai exactement le même problème avec mon UMO+ J'ai déjà posté sur des forum mais jamais eu une aide concrète.. J'ai vérifié les diff axes et regraissé... Le problème se répète avec différents paramètre d'impression et à chaque fois situé à la même hauteur. C'est clairement un problème mécanique d'après moi, je pense pour le moment que c'est le roulement à bille qui pose problème mais je ne suis pas sur à 100%...

Voici un lien vers dropbox ou vous pourrez voir mes impressions ( sur une photo j'ai aligné mes print ou on voit clairement les lignes au même niv .. )

Lien dropbox: https://db.tt/tmNDFxjU

  • Link to post
    Share on other sites
    Posted · UMO+ ligne horizontale


    Y a quand même quelques pistes dans ce sujet (merci Fab). Donc pour toi aussi ca peut être interessant:


    The third theory I have (these are all things that happen to people all the time on this forum) seems to me the most likely and possibly the most difficult to prove - it's that there is something sticky or wrong with the Z axis where it moves a little bit less than it is supposed to (say .19mm instead of .2mm on each layer) and then suddenly it finally catches up and drops 2mm all at once. Something like this. Because something is sticky maybe in the Z axis. You can test this by pushing the bed up and down and trying to feel for a bad spot. You can visually inspec the Z screw - also look for it warping. But the best test is to print a few different parts - preferably a 10mm square tower that goes the same height as the print you already printed to see if there is a gap layer. Then print another one 15mm square to see if the height is *still* the same. If 3 out of 3 prints hafe the same problem at THE EXACT SAME HEIGHT and the 3 prints are all different sizes (different amounts of material on each layer) then the problem must be related to Z screw or Z nut, or Z bars and you can have Ultimaker send you new ones. It might be as simple as adding some grease to the Z screw (in the green plastic container) and some light oil to the z rods.
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • 18 Visiting our virtual showroom

      1. 1. Have you visited our virtual showroom before?

        • Yes
        • No
      2. 2. If yes - what content did you find most interesting?

        • Information about Ultimaker ecosystem
        • Applications & application stories
        • Customer success stories
        • Webinar sessions
        • Material wall & ecosystem partners
        • New product introduction; software subscription plans
      3. 3. What of the below would make you consider visiting (again)?

        • New Live Ultimaker Webinar streams
        • ‘Ask Me Anything’ with industry experts or Ultimaker staff via main stage and public chat
        • New customer success stories
        • New applications
        • Presentations/news from ecosystem partners
        • Opportunity to meet representatives for an interactive tour
        • Helpful videos like Software tutorials
        • Other; leave input in a comment below!

    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    • Create New...