Hi,
I'm wondering what's the best/easiest way to make the UM3 to extrude 100mm for E-steps calibration.
Thanks.
My ultimaker3 had a default factory extruder step setup of 369 steps/mm.
When I tested with 100mm cold extrustion, I got 105.9mm..
y * 105.9 = 36900
y = 36900 / 105.9 = 348.4 (round to 1 decimal)
===========================================
SSH root access to your Ultimaker, login after that with: ultimaker/ultimaker.
=> 100mm extrusie:
sendgcode T0
sendgcode M302 S0
sendgcode G92 E0
sendgcode G0 E100
=> Test your new step value first with: