UM3E _ build plate far away from printheads (10cm)
Hello, I'm coming up to you about an issue I have with a UM3E that I tried to use after few months of inactivity.
I installed the last firmware normally via the printer but, when I wanted to start a print, the UM3E failed during auto levelling step.
Actually, the build plate stops at 10 centimeters from printheads, even if I try to level it manually.
I tried every "normal" ways to solve the problem, user reboot, factory reboot, second setup of the firmware, via USB t
Hi, I asked a friend with more skills than me for some help ✊
He acceed to the ssh server of the printer, logged in with ROOT and tried to launch Daid's command (seen above) to set the Hardware type ID to "9511".
But,
an error occured, with this message (last line) :
python3 /ulti_installer/configure_eeprom.py 9511
Traceback (most recent call last):
File "/ulti_installer/configure_eeprom.py", line 24, in <module>
eeprom = EEPROM()
File "/ulti_instal