How To Create Single Wall Prints? BUG?
I'm trying to design models as "vase mode". I model in Fusion360 and my latest endeavor is that a few projects require single wall prints.
FIRST. I started off with a .41mm offset, (creating thickness of .41mm because a .4mm thickness will not slice)
So as a .41 thickness, the print head creates the full perimeter yet backtracks to the starting point. Its like watching an rotary phone! Print - rewind - print next layer.
After some troubleshooting, I found in the gco
We get a lot of questions about this actually.
We use about 7/8ths of the nozzle size in Ultimaker's printers because adjacent lines tend to adhere better together then. Because the nozzle is a bit wider, the adjacent line gets partially printed on top of the previous line. 7/8ths of the nozzle size seems to be the sweet spot (so we also use 0.7mm lines for 0.8mm nozzles).
This works completely different for different nozzle designs, so if you have a different sort of nozzle then the s
