UM2 Underextrusion at Low Volumetric Flow Rate
Hi all, this is my first post and it's a long one. I'm relatively new to working with UM machines and I've got two of them at work that I'm having some extrusion issues with. Both machines are UM2e's with Olson Blocks installed and 0.4mm E3D nozzles.
Basically, I'm seeing a lot of gaps between lines in the infill and between perimeters which is an obvious sign of under extrusion. If I try and print at what I would consider normal temperatures for PLA (190-210C) the extruder will clic
Yeah something is wrong with your printer. It's printing at about half the volume you should be able to achieve. If you go into the menu on the machine you can see how many hours is on this printer. How old is it? How many hours of printing?
Most likely the teflon needs replacing again already - probably due to being used at higher temperatures. There could be overheating issues or current-to-the-extruder-stepper issues but I doubt it. Also your bowden probably should be replac