PETG print on Ultimaker S5 with Cura
Hi experts !
I have to print black PETG with my Ultimaker S5, but there's no settings in Cura3D for it.
Except the print core and bed temperature, what important setting do I have to change ?
Thanks a lot
Hi Dureiken,
As the guys before me stated follow those steps first!
Regarding PETG we experienced that the following settings worked best for us:
Print Temp. 250
Bed Temp. 85
Retraction Distance 10mm
Retraction Speed 35mm/s
Also did we experience a lot of problems with printing infill patterns at a speed > 60mm/s
To be safe I would recommend to print infill at a speed of 40mm/s max
Hope this gives you a good start
