Dual Extruder and Cura 4.3.0
Hello everyone,
I have a dual extruder printer.
I want to print with the second extruder only . I use Cura 4.3.0 (see picture attached) but the first extruder works only (see gcode file attached). So, i have to correct the file.
Did I make something wrong or incorrect settings ?
Please, let me know.
Best regards.
Bernard
CFFFP_Cone_support_bobine_avant.gcode
CFFFP_Cone_support_bobine_avant.3mf
at the left red arrow; buttons to select the extruder to use for the selected model
at the right red arrow; where you can turn of/on a extruder
In the detail setting you can also select a specific extruder for things like support, brim, infill etc...
