[Tronxy X5SA Build Volume Home Position Cura 5]

I have a Tronxy X5sa and on updating from Cura 4.8 to Cura 5 the end Gcode for the home settings are not working as before.

On completion of a print the head moves and over runs to the back right causing motor crunching for a second and stops .

If I home the head on the machine it over runs to the left. I have to then stop the machine and home it manually on the machine panel.

I assume that the build volume start end gcode have changed somehow for this to happen. I have checked the volume settings and they are correct.

The end gcode is different and uses absolute settings and not G28 home positioning.

I have copied and pasted the old end settings from v4.8  v4.12 and also Tronxy Cura but can't start a print or no change to the homing of the head.

I have gone back to using previous versions with no problems but would like to upgrade to Cura 5 for better functionality.

Now currently using Cura 4.12 without problems.

I,m not familiar with gcode settings but willing to try if someone has a machine end and start gcode for this printer.

I have not checked start at center option with any version.

could this be my problem?

Many Thanks 

Scramjeta