![](http://content.invisioncic.com/ultimake/set_resources_16/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
PeterDenis57
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by PeterDenis57
-
-
Lors d'une impression de 2 petites pièces, j'ai constaté l'apparition massive de stringing. J'ai contrôlé la température d'impression qui était à 230° alors qu'elle était réglée sur 190° dans Cura. J'ai été obligé de corriger la température à plusieurs reprises durant l'impression avec des sauts à 220° puis 200° etc.
Quelqu'un a une solution à ce problème ?
température impression erratique sur alfawise U30
in Français
Posted
GregValiant,
I think I have fixed the problem. I installed extensions and among them is an 'Post processing' > 'Modify G-Code' where the following preset code was installed (See the attached file).
So the temp was set to 230° and decrease by 10° every 7 mm.
Sorry for that !
Thank you for replying to this post !