About This File
This was a part printed for a 3D Hubs customer. XT-CF20 can be particular but I really like the look of it and have used in for things where that look is as important as any strength advantage. The second image is of a calibration object printed with the same profile as used for the first model.
My technique for printing XT-CF20 is to print it hot at 250c for good layer bonding, on a very clean and hot build platform 80c, prepared with hair spray or 3DLAC, with cooling at 100% after the first layer, using a 500 micron steel nozzle, and SLOWLY at 22-24mm/s.