[Project planner stops early]

Same here, my brother removed the "at: {day} {date} {time}" on his setup and it works fine again!

Thanks!

[Project planner stops early]

My system language is english, but I use the Swiss-french time and date setting.

On a freshly installed system project-planner works again. If it starts acting strange I'll try removing the gcode you mentioned.

Thanks for the support!

[Project planner stops early]

Thanks for the tip. This is what I get in the terminal once its stops:

 

Choucroute:Cura lc$ /Applications/Cura/Cura.app/Contents/MacOS/Cura Choucroute:Cura lc$ /Applications/Cura/Cura.app/Contents/Resources/Cura/util/mesh.py:69: RuntimeWarning: invalid value encountered in divide normals[:,0] /= lens/Applications/Cura/Cura.app/Contents/Resources/Cura/util/mesh.py:70: RuntimeWarning: invalid value encountered in divide normals[:,1] /= lens/Applications/Cura/Cura.app/Contents/Resources/Cura/util/mesh.py:71: RuntimeWarning: invalid value encountered in divide normals[:,2] /= lensException in thread Thread-2:Traceback (most recent call last): File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threading.py", line 552, in __bootstrap_inner File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threading.py", line 505, in run File "/Applications/Cura/Cura.app/Contents/Resources/Cura/gui/projectPlanner.py", line 978, in OnRun   startGCode = profile.getAlterationFileContents('start.gcode') File "/Applications/Cura/Cura.app/Contents/Resources/Cura/util/profile.py", line 534, in getAlterationFileContents   return unicode(prefix + re.sub("(.)\{([^\}]*)\}", replaceTagMatch, alterationContents).rstrip() + '\n' + postfix).strip().encode('utf-8') File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/re.py", line 151, in sub File "/Applications/Cura/Cura.app/Contents/Resources/Cura/util/profile.py", line 430, in replaceTagMatch   return pre + time.strftime('%d %b %Y')UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 4: ordinal not in range(128)

 

[Project planner stops early]

Strange still no sucsess even after removing pref and re-installing cura.

It really stops slicing after the first object and says "it took xx secondes to export the file." with a progression bar half way there.

How can I run cura in terminal?

This week-end I'm doing a clean system install anyway it might help.

[Project planner stops early]

So I found a quick workaround.

Login as a guest install a fresh copy of cura and sice. This will only work for the first slice and I cannot open the preference panel.

After that I need to delete the guest user and login as a new one in order to slice again… strange.

Maybe it has to do with the preference file? I cannot find where it is saved.

[Project planner stops early]

Since 1 week project planner stops after slicing the first element of a group. It doesn't matter what I'm slicing. I have had the problem on another Mac. I tried saving to another folder (i.e. desktop) It seems that the windows version is not affected.

Config:

Mac OS X 10.8.2

Cura 12.11 (fresh install)

[400 scale models]

Here is a little story where an Ultimaker helped build 400 scale model of an architecture project.

http://www.leocollomb.ch/3d-print-400-m ... arliament/

Long life to Ultimakers!

[Heated Bed]

Nice do you know if the heated bed was also available as a kit to install on older ultimaker?

[Heated Bed]

I'm looking to install a heated bed on my ultimaker as well. But I have no idea where to start.

So I'm very interested to know if someone successfully did it and if so if he/she would be kind enough to share how?

I'm thinking to order the following pieces and then try to assemble them:

 

-MK2 heated bed

-thermistor such as EPCOS

-Could someone advise me on what type of external alimentation is needed?

-I'm still not getting how the heat is controlled?