coyote
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by coyote
-
-
Hello
What is exactly print speed??
If i set a print speed of 100mm/s i should see the print head moving at 100mm/s but i seenothing that high. I think it's more 10mm/s.
What wrong?
A part of that print quality is pretty good
-
I've just finished building mine. It was labeled wrong.
To check with security, i've used the test feature of cura that ask you to press the endstop to verify it is well wired.
-
Hi all,
I've just received my kit in france last monday.
After 6 hours of work, i've just have to do the wiring and here we go. This just to say that everything went really well and the kit is really well done.
In my kit i have both 7x parts and black motor spacer. I've used the 7x parts as in the assembly instruction.
Can you confirm me it's better to change them for the black spacer?
print speed??
in UltiMaker Cura
Posted
thanks a lot. that's exactly that.
The print layer time is set to 10sec and as the piece is really small. print speed goes to the minimum...