[Can your UM2 printer achieve 10mm3/s ??? Test it here...]

Hey Gr5,

Thank you for your advices. This has really helped. Obviously I was a little too close to the glass plate...

Ultimakers instructions for leveling allows a certain range of interpretation :-P

 

[Can your UM2 printer achieve 10mm3/s ??? Test it here...]

Hi Everyone,

OK, I can reach the 10mm²/s , but at 9mm²/s there are occasionally problems. At 10mm²/s I can hear the extruder spring click every 4 seconds and there are small gaps in the print. The result sound pretty good for me.

I'm a bit confused. The extruder have always problems when printing the first Layer of a large surface. (0.3mm initial layer thickness, 20mm/s bottom layer speed, PLA at 115^oC). The extruder spring clicks and I don't get a regular surface. The building plate leveling looks OK for me.

I thought the extruder is not strong enough to handle that - but after the test I would say it should. Any Ideas?

 

[Filament luftdicht lagern]

Es gibt für etwa 10,-- € Trockenkissen für Schränke incl. Indikator. Die können auch wieder getrocknet und neu eingesetzt werden. Sollten sich in einer luftdichten Box eigentlich gut machen.

--> "Safe Dry" für Schränke und Tresore