yinzer
-
Posts
6 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by yinzer
-
-
Okay, so I tried to run it and my machine says error at line 19. I cant figure out how to attach the two files for comparison, the "my media" thing leads me no where. So Ill copy and paste the first bit of each.
14.11-rc8:
M190 S70.000000
^Firmware:V1.07
^Checksum: NO
G21
G90
# Select Extruder 1
M104 S230
M542
M551 P2000 S100
M543
M227 P163 S230
M228 P0 S163
;enable auto-retraction
M227 S896 P896
;Layer count: 49
;LAYER:0
M107
M103
G1 X-53.767 Y-14.890 Z0.200 F4500.0
;TYPE:SKIRT
M108 S28.8
M101
G1 X-54.665 Y-15.009 Z0.200 F2100.3
G1 X-54.665 Y-15.008 Z0.200 F2100.3
G1 X-57.259 Y-15.347 Z0.200 F2100.3
G1 X-58.392 Y-15.817 Z0.200 F2100.3
G1 X-60.809 Y-16.819 Z0.200 F2100.3
14.03-test2(this one runs)
^Firmware:V1.07
^Checksum: NO
G21
G90
# Select Extruder 1
M104 S230
M542
M551 P2000 S100
M543
M227 P163 S230
M228 P0 S163
;enable auto-retraction
M227 S896 P896
;Layer count: 49
;LAYER:0
M107
G1 X-28.51 Y-2.75 Z0.20 F4500.0
G1 X-28.51 Y-2.75 Z0.20 F4500.0
;TYPE:SKIRT
M108 S288.0
M101
G1 X-29.41 Y-2.86 Z0.20 F2100.3
G1 X-32.02 Y-3.20 Z0.20 F2100.3
G1 X-35.58 Y-4.68 Z0.20 F2100.3
G1 X-36.54 Y-5.42 Z0.20 F2100.3
G1 X-38.61 Y-7.01 Z0.20 F2100.3
-
Thanks daid will try it tonight.
-
Daid, I have posted a topic in the Kisslicer refugee camp and am hoping that someone is located in the netherlands that owns a bfb. I know that Penskeguy has the same machine as me but i believe he is located in the us. Thank you so much for your consideration!
-
Thank you so much for the response! I am sorry to hear that the 3d touch is not supported. I also share your concern about johnathan and have tried to contact him to see if there was anything I could do to help him.
Hopefully there will be a workaround someday so that we bfb guys can use cura.
Thanks
Yinzer
-
Hello everyone,
I would love to try out the cura software on my bfb 3d touch dual extruder. Does anyone know if my machine is supported?
Most of you already know the state of affairs with bfb and cubex which left all of us who bought bfb printers high and dry. I am currently using kisslicer, but the developer has disappeared and is no longer supporting the software development.
I am looking for an alternative and although I dont own a Ultimaker, I would enjoy the oppertunity to contribute to this community.
Best Regards,
Yinzer
Machine Settings / Firmware for 3d touch
in UltiMaker Cura
Posted
Bump