darls
-
Posts
2 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by darls
-
-
Hello,
I'm having an issue with my utilimaker2 where the printer does not reliably start print jobs.
Symptoms:
- The printer completes its heating cycle and enters into the printing phase but (intermittently) hangs up (with 6 hrs print time indicated) and wont start the print job. The printer is not frozen as the print can be abborted and restarted via the navigation wheel.
- Once the printer is running properly, multiple print jobs can be completed with no problem.
workarounds:
- Power cycling the printer works periodicley, however only solves the problem 10-25% of the time.
troubleshooting:
- Multiple STL files on multiple computers using the official Cura software produce the same results.
Possible issues
- SD card? (investigating)
- The printer completes its heating cycle and enters into the printing phase but (intermittently) hangs up (with 6 hrs print time indicated) and wont start the print job. The printer is not frozen as the print can be abborted and restarted via the navigation wheel.
Print job not starting (Intermittent)
in UltiMaker 3D printers
Posted
Correct.