ecflam
-
Posts
7 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by ecflam
-
-
Hi all,
I got a UM2 couple weeks ago and the material feeder started making this loud squeaking noise couple days ago. Any idea? Here is a video:
http://lavandespa.com/images/temp/squeaky_feeder.mp4
Thanks.
-
OK, I will give that a try when the device arrives. Thanks.
-
Does Cura 14.03 work with Doodle3D wifi box?
I apologize if this was answered before but I could not locate the answer. I am getting blisters on my fingers plugging in and out the SD card BTW I am using ultimaker 2. Thanks.
-
Thanks for the fast response. I adjusted the buildplate and the result came out much better. Thanks.
-
Hi I am a newbie to 3D printing, just got an ultimaker 2 and has been experimenting with it.
I found that the few layers of my models constantly are not bonding together are strands are coming off. This is true for models with or without overhangs.
I searched different forums but I could not solve this issue. I have attached the top and bottom image of the model. The top looks great. But the bottom has strands coming out.
Top: http://lavandespa.com/images/temp/top_print.jpg
Bottom: http://lavandespa.com/images/temp/bottom_print.jpg
Here are my settings:
nozzle temp: 230
bed temp: 60
print speed: 35
retraction length: 5.5
retraction speed: 35
layer height: 0.1 or 0.2 (0.1 gives slightly better result for overhangs)
Fill bottom/top thickness: 0.6
Fill density: 20%
Support type: touching plate
Adhesion type: raft or brim (same issue with either)
Cool:
min layer time: 5
Enable cool fan: ON
Fan full on at height: 5mm
Cool head lift: ON
Infill: 15%
Please let me know how I can improve the print. Thanks.
-
Any recommendation on good filament vendor in US?
Material feeder makes loud squeaky noise
in Coffee corner
Posted
nevermind, I unwind the filament roll a bit and the sound went away.