rob_hoffman2003
-
Posts
9 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by rob_hoffman2003
-
-
yes I did check all the pulleys are tight.
I marked the pulley, and they still consistant on they position.
the error come after there is a sound from the z motor.
please let me know what should i do right know.
-
dear dim3nsioneer,
I'm using ultimaker 2.
I've checked the short belts, and all are tight.
and there is sound in motor Z.
-
-
hi gr5,
my pc can't detect the ultimaker.
there isn't any new hardware detect after I plug the usb cable.
how to solve this.
I try using in pc with windows 8.1, still same there isn't any detected new hardware.
-
hi gr5,
i just checked all motor and switch is fine.
there isn't any shorted
and now i don't know, what should i do right now.
-
dear korneel,
may I share my problem here?
my problem the z switch broken.
I just started first run wizard, in the step 3 the display show " z switch was broken"
could you help me to find the best solution. I just bought and not yet using this printer.
it was so deep condolence. :sad:
-
hi reibuehl,
did you got solve to your problem?
we also have some problem.
i just start using ultimaker2 but in my first run wizard.
i got error in step 3, the z switch was broken.
would you share if you have got the solve.?
thanks
-
hi guys ,
I also newbie here, please help us, i just start using um2.
but in my first run wizard i got error about the z switch was broken.
please let me know to solve this. thanks
shifted layers
in UltiMaker 3D printers
Posted
i've made sure all pulley on the motor axes are tight.
I also marked on the pulleys to make sure.