gestalt73
-
Posts
2 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by gestalt73
-
-
In case it helps, I ran into a similar issue with Cura 15.02.1
Turns out that your Shell thickness (on the Basic tab) must be a multiple of your Nozzle size (on the Advanced tab).
If it's not, Cura will not generate support for horizontal surfaces.
For example, if your nozzle size is 0.44mm, your Shell thickness needs to be an even multiple of that, 0.44, 0.88, 1.32, 1.76] etc.
Don't know why, it took me a while to figure out, but it solved my support issue.
Support Bug in 15.02.1
in UltiMaker Cura
Posted
In case it helps, I ran into a similar issue with Cura 15.02.1
Turns out that your Shell thickness (on the Basic tab) must be a multiple of your Nozzle size (on the Advanced tab).
If it's not, Cura will not generate support for horizontal surfaces.
For example, if your nozzle size is 0.44mm, your Shell thickness needs to be an even multiple of that, 0.44, 0.88, 1.32, 1.76] etc.
Don't know why, it took me a while to figure out, but it solved my support issue.