[Extrusion issue and how to print issue w/pictures]

I don't think meshmixer will do the teeth - too close to other stuff.  Any cad program will import stl - For example sketchup.  Or Design Spark Mechanical.

 

Meshmixer worked well for the teeth except for one. I printed the skull at 4.5" tall so it was enlarged enough that allowed the supports to be placed along the jaw and they were easily popped off.

Thanks for all your great advise.

[Filament drive slipping??]

Thanks, as this helped me with an issue I started having with some orange PLA and was not sure which screw was the one to tighten.

[Extrusion issue and how to print issue w/pictures]

Or use meshmixer for supports

 

Thanks for this information, as this looks like an awesome program that I wish I knew about a week ago. Using this now to put in the supports.

[Extrusion issue and how to print issue w/pictures]

The teeth are much harder. I would do my own support in cad.

Is there a cad program that will import .stl files and able to edit them?

[Extrusion issue and how to print issue w/pictures]

First off I am having an issue where it seems to over extrude at the top of what i am printing leaving globs of material that require extra clean up that I don't want to deal with.

Next question is, how I can print these teeth properly as they overhang and Cura does not add support under them.