-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by microdure
-
-
Bonjour,
Je viens de commandé aquasolve de chez formfutura pour ulti original dual extrusion .
Aquasolve à la particularité de se dissoudre dans l'eau .
je l'ai spécialement commander pour imprimer les supports d'impression pour avoir plus facile après pour le nettoyage .
j'ai été étonner à la livraison de constaté que la bobine ne contient que 300 gr de filament pour un prix de 29.95 € soit 99.80/KILO
Quelqu'un aurait-il déjà travaillé avec et aurait quelques conseils à me donner
Merci d'avance
-
Hi Sandervg ,
Thank you for your feedback
My order number is 15253206
thank you in advance
-
Hello,
I have the same problem with my order
I ordered a dual extrusion kit € 285 ttc on September 10 and I still do not have a shipping confirmation after 13 days ^^
Knowing that the product ordered is delivered in the (delivery. 2-5 working days)
their support link sue payment confirmation redirectionne on the support page or it ua two links of contact block.
it's raiment is froutre people of the mouth !!!!
-
Hello
I disassembled for cleaning the nozzle. I fixed on a clip I made flu heated with a small blowtorch and then I manually abs pushes a wire in the conduit of the nozzle until out the other dimension then I leave to cool. well once I warmed very briefly cooled the nozzle max 100 ° (water bath). Once warmed briefly with another clip I shoot with a snap abs nozzle thread. this has the effect to pull in all the particles cling abs, particle that was deposit on internal walls of the nozzle.
-
I got this info from Ultimaker support:
----
Printing with CPE has its pro's and con's, please see below:
Con's:
You need to print CPE on higher temperatures just like ABS. (240/250)
Printing on higher temperatures will cause the PTFE to wear out faster and that is why we included one when you purchase a spool of CPE.
CPE has just like ABS the tendency to warp, a heated camber may help reduce this.
Pro's:
CPE is just as strong as ABS.
It does not have any dangerous fumes or strange odeur.
It has nice bright colors.
Ok many thanks
but questions remain...
- TG ?
- Strength to chemicals ?
- optimal print setting ?
hello,
I can not to have good results with températurre between 240/250 °
the best settings on my OU are
Layer thickness: 0.04 mm
Print speed: 40mm / s
t ° nozzle: 223 °
t ° carpets: 60
flow rates: 110%
CPE
in Materials & profiles
Posted · Edited by Guest
here is a quad frame CPE