[Warping prints]

So amazing but they want to remove me because I do not promote product Ultimaker.

Sorry for the confusion and success.

[First Layers problems (thin, not stick, etc) - Tried several solutions without success.]

You can also print on a cold table PLA and similar materials.

The first layer need not be perfectly adhere to the table and does not need to be closed door.

Simply use glue to 3D printing PROGLU3D PLA-cold, the adhesive solves most of the problems of deflection, warping and detachment a printout from the table.

Of course you need to level the table and improve print settings but you do not have a heated table and really save money.

You can also print on a cold table PLA and similar materials.

The first layer need not be perfectly adhere to the table and does not need to be closed door.

See this picture, these are prints of 50 hours or more without heating the table and printing is constantly on the spot.

[Warping prints]

You can also print on a cold table PLA and similar materials.

The first layer need not be perfectly adhere to the table and does not need to be closed door.

Simply use glue to 3D printing PROGLU3D PLA-cold, the adhesive solves most of the problems of deflection, warping and detachment a printout from the table.

Of course you need to level the table and improve print settings but you do not have a heated table and really save money.

You can also print on a cold table PLA and similar materials.

The first layer need not be perfectly adhere to the table and does not need to be closed door.

See this picture, these are prints of 50 hours or more without heating the table and printing is constantly on the spot.

[Welke lijm en waar]

Hello Jeex,

ik gebruik als kleefstof een spuitbus met  haarlak en printbed op 55 à 60°C. Werk voor mij prima bij PLA.

 

To the cold print of PLA, HIPS, Flexi-PLA NinjaFlex, Carbon and T-Glass recommend PROGLU3D PLA-Cold

[Welke lijm en waar]

Ok geen probleem, mensen zijn altijd bang voor nieuwe producten :>

Ik betwijfel dat 3Dlack en Pitt gaf een dergelijk effect.

[Welke lijm en waar]

Ik zou aanraden, en hij past de nieuwe lijm voor 3D printing PROGLU3D