[correct belt dimension??? 300mxl or 240 mxl ?]

It seems like the 297 mm belt (297MXL025G) is probably best for an Ultimaker Original. My long belts are getting long enough that it's becoming difficult to take up the slack with my clothespin spring tensioners so I'm planning to order new long belts from B&B. The minimum order is $35 and they also offer a discount for 10+ quantities of the same belt SKU. If I order three long belt sets (12 belts), the price works out to $19.92 / set total. (Including the B&B shipping and handling charge of $10.07).

If anyone in the U.S. needs new belts, I could package a set or two in a $5.95 USPS small Priority box (which includes up to $50 insurance) and mail them to you. At $25.87 / set, you'll be out of pocket about $20 less vs. placing a single set order with B&B. Please PM me before the end of this week (August 23rd, 2014), if you are interested in a replacement set(s).

-Cal

 

How did you make out with the 297MXL025G belts? I too JUST got in replacements for my Ultimaker Original and they are indeed the 300 MXL belts which are too big (by a hair). The original Ultimaker instructions were clear about making sure they were tight.

I got this response from the supplier support team:

"We do have the same thing on our UMO, that one of the belts are not as tight as the other belt (not drastically but a bit of sagging). When we brought it up to support about the issue, we were told that it was normal and could get a tensioner but didn’t need it. After 2 years, turns out they were right since the belts don’t stretch and are notched, things have been working fine even without a tensioner. "

Hoping for some direction here. Thanks!

[Cura 15.06.02]

 

There is no print button.

 

Could you post the log file?

 

15.06.03 works fine. The save button properly turns into 'Print with USB'

[Cura 15.06.02]

I've been an Ultimaker / Cura user for about 3 years now. I've downloaded and installed 15.06.02 and I can't even find a PRINT button. All I have is a "Save to Disk" button in the lower right.

I see that in the release, one of the line items is: We've made sure that USB printing and firmware updates work on all supported platforms. I'm connected, and I've updated the firmware on my UM original. There is no print button.

Any help?