newdesign
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by newdesign
-
-
Thanks for the reply, had a look at this but this is for etching. What i need to be able to do is is cure Uv resin with a 402nm laser. Just need to be able to turn the laser on and off at the right time through out the code instead of having the extrusion process happening.
-
Would anyone be able to point me in the right direction?
-
any links? It seems simple seen as other people have to be doing but i just cant figure out how to go about doing it. So all information i get is new to me
-
Hi Nallath, thanks for the reply im using cura 15.04.4. this is were i lack knowledge on script writing, i am not sure how i would go about doing this?
Is there anything out there to help me do this?
-
Hi, looking to get up and running using the cura software for my 3d printer. Its a uv resin curing printer so uses a laser to cure the solution as it rises from the vat.
My problem is that when i generate g-code its creates it as to think there is Extrusion happening, but what i need to do is replace this with my laser function (M126 on) and (M127 off) through out the entire code. how would this be achieved?
I have read about people creating a plugin for it or writing a script for it but i would not know how to do that. Any advise or where to go would be great.
Plugin to replace the extrusion g-code with my laser on/off function M126,M127)
in UltiMaker Cura
Posted
thanks for the reply guys. i think the problem here is the lack of open socure software to do this, and that my knowledge is limited has its restrictions. Thank you labern, i will massage him and see can he help me out. this project is draging out on me and would really like to get it finished.