[I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE]

but also with pla?

50mm x 0.2 layer x 0.6 nozzle = 6mm3 , thats 3 times the output volume compared to printing with the standard 0.4 at 0.1 layers.  I would try going up to at least 220 celsius, maybe more.

there is no "best" temperature, it depends on what you want to achieve. For a strong mechanical part go a bit hotter (=better layer bonding) for a display piece you may want to stay a bit colder, but looking at the fact you use 0.6 + 0.2 layers it's probably not a display piece.

[I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE]

yes i have cut it, but the problem is not the cut, the fact that doesn't print in 02 happens with avery model

Do youmean to cut off 84mm from the bottom of your print? If your model is shorter than 84mm you will not print anything even if you temp. is 300!!!!!

[I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE]

oh yes sorry, but it's a month that i've been printing in 0.1 so i have no bad prints to show, in next days i will print something in 02 in order to show it to you. ps:the temperature is 210.

 

It would really help if you post a photo of your result and mention the printing temperature you used.

 

[I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE]

I PRINT WITH THE PARAMETERS OF THE PHOTO, DO YOU SEE SOMETHING STRANGE?(PS:NOW IT IS SETTED FOR A 0.6 EXTRUDER WITH OLSSON BLOCK) [/media][/media][/media]

IS THERE SOMETHING WRONG?THANKS

[I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE]

HI, I HAVE AN UM2 BUT IT'S ABOUT 3 MONTHS THAT I CAN PRINT ONLY IN 0.1, I DON'T UNDERSTAND WHY I AM NOT ABLE TO PRINT IN 0.2. I HAVE ALSO CHANGED MORE AND MORE TIMES PTFE...

CAN YOU TELL ME YOUR OPINION?THANKS

[Problem of extrusion with um2]

Hi guys,i don't know why i AM not able to print with my um2,it seems like if it wasn't able to extrude enough material,and i print at 50 Speed,0.2 layer, 1.2 shell thichness and 150 of travel Speed,temperature 210,with eumakers pla.i have just changes the ptfe Because i tought that that was the problem but nothing changed....in the pitture is shown the problem....help me please!:(