[One side perfect the other side not so much.]

Much better. Thank you very much. I'll have to try and print the other stuff that I was having trouble with. Thanks again!

[One side perfect the other side not so much.]

The 100% fill was a mistake. I forgot to change it from a previous print. I'm going to change it to 20%.

I'm going to try printing cooler and slower and I'll let you know how it turns out.

Will the UM2+ upgrade work on the Go?

[One side perfect the other side not so much.]

Hello,

I'm having some quality issues with my Ultimaker2Go. It seems to happen more often when I print taller models (when I mean tall I'm talking maybe 1 inch tall) I had this issue when I first got the UM2G and printed the Ultimaker robot. One of it's ears were perfect and the other wasn't. I thought it might be a bed leveling issue but areas above and below it seem to be fine.

They don't look terrible but I find it weird that one side is better then the other.

Here are some pictures and the setting I was using. I'm sure it's something simple. I haven't tried moving the model off center yet, I might try that later.