Pasaduino
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Pasaduino
-
-
Ok guys thanks for walking me through that one, I got the temp sensor figured out, running a thermistor direct to the board I have room temp in cura. Now my question is, since I have the wrong 12v 40w for my e3d, can I order the dfrobot 19v 38w heater cartridge (will it be in the margin of error?) and is it a direct drop in replacement for the ultimaker original one?
thanks
-
In configurations.h it says 595 but it never says 597 as thermo option, this is my current firmware settings with a picture of the current board. Im sorry if this has already been answered 1000 times I've really been searching both the ultimaker and reprap forums. Printer connects to repetier-host but gives me the same 134 ish room temp reading and I cant move the steppers with the arrow controls.
-
Does anybody know if you can just wire the temp sensor directly to the board and cut out the thermocouple? I remember seeing something about just hooking up the sensor directly to the signal and ground connection points on the motherboard connection. The more research I do there more I see how much of a nightmare temp sensing issues are with the umo. I can't believe I'm about to buy a prusa i3 kit because I can't get this thing running, this is so lame. I'm so close, I literally feel like I just have to change the right thing in configurations.h and it would work. But I don't know what to change.
-
Thanks for the speedy reply, looks like I have a tc1 thermocouple board and I need a tc2 from fabrc8, and it looks like there boards are back in stock now, I'll post what happens.
-
Hello all, I've been gathering parts and building this Ultimaker Original since early December. I cut the acrylic parts on the laser at my college, and yes I regret making it out of acrylic but I did manage to assemble it and it looks sweet, just too bad I cant get it running. The major modifications it has is the e3d print head, and um2 feeder upgrade with the um1 adapter. When I connect to cura it recognizes the printer uploads new firmware, then when it goes to check nozzle temp it says the temp is 127, instead of something like 30. If I skip that step and go to check x, y, z axes it does not connect to printer. Just switched out the motherboard for one from folger tech, I bought the red thermocouple I pictured, thinking about buying the black one because that seems to be the issue, I have the genuine ultimaker original thermo sensor from fabrc8, looks like fabrc8 does not sell the thermocouple circuit board. Any thoughts would be nice I can provide more pics and info. Thank You
Ultimaker Original Acrylic Homemade Build - Thermocouple/Temp/Initial Setup
in UltiMaker 3D printers
Posted
This printer is for sale for $600 in the southern california area if anyone is interested.